Description

Recommended for the “D&H Technique in Realism Mosaics”

If you are booking into one of Dianne & Kala’s courses, and need a pair of these nippers, please email me  and I will get them in for you.  I also stock an extensive range of the Vision glass preferred by Kala and Dianne for their courses. Checkout the classes they currently have available on this technique on offer here

Otherwise, please do checkout my supplies of the Seabell Wheeled Glass Nippers here. They are essentially the same as the QEP Xtreme nipper, with the addition of the Rubber “Glass Saver” rings, and at a better price point.

An ergonomic hand tool for cutting stained glass and glass mosaic tile. The QEP ProControl Glass Nipper is a compression nipper with numerous improvements to appeal to professional mosaic artists who are cutting glass tile and sheet:

• lighter weight (240 grams) and longer handles (2.5 cm extra) to make cutting easier
• tile thickness lock reduces hand fatigue
• has a hex key built into the back for adjusting or changing the blades, and for tightening the fulcrum
• cutting-depth guide helps make uniform cuts
• can be adjusted depending on tile thickness and preferred cut depth
• suitable for left or right-handed users without adjustment

These nippers cut glass & glass tiles up to 8mm thick with minimal crushing and splintering, and easily cut molded tile into quarters, halves and triangles. The circular blades do not actually rotate while cutting.

Replacement blades are available (see below), although the blades should last for years if you don’t abuse them by attempting to cut materials other than glass, which may impact the precision of the tool itself.

NOTE: These nippers have been designed for use with Vitreous Glass, Stained Glass and Smalti up to 5/16” (approx. 8mm) thick, as stated on the packaging.  If used on any other material, replacement under warranty is at the discretion of the manufacturer.

Maintaining your Nippers

• Clean the tools periodically with a soft cloth and appropriate cleaning agent – I recommend Isopropyl alcohol to remove silicone/Polymer residue
• As with all tools, I occasionally wipe over with a soft cloth and WD40 – keeps everything moving smoothly
• keep closed when not in use (switch may be tightened with a Philips Head screwdriver if necessary)
• Use the Allen Key (on the back of the tool) to tighten/adjust the wheels and keep the fulcrum screw firmly tightened.
• tighten the 3 position tile thickness lock periodically. This can be done with a Phillips Head screwdriver
• Rotate the wheels periodically as they wear.  A set of blades should last for some time
• Replace the wheels when you have completed one full rotation.

Spare wheels for the QEPs and Seabell Wheeled Nippers are available here