You are here: / / / / Pourable Cement – GREY
Self-Levelling Cement GroundSelf-Levelling Ground

Pourable Cement – GREY

$5.00 Incl. GST (Aust only)

Grey pourable background for mosaics.

In stock (can be backordered)

Add to Wishlist
Add to Wishlist
SKU: GRT-POURABLE-GREY Categories: , ,
Share On:

Description

So sophisticated!

This product adds another dimension to your work, and is very cost effective!  I am selling in 1 kg bags, as the shelf life is only 6 months.
The sample project shown in the photo is 30cm high, and used 4mm stained glass and tile. For this project, I used approx. 175gms product.

  • Australian-made
  • Shelf Life is 6 months
  • Can be coloured with pigments or oxides (no more than 10% by weight)
  • Mix to a pourable consistency –  22.5 to 25mls water to 100gms powder (will vary depending on temp)
    • Distilled water is recommended
    • NOTE: 20mls water weighs 20gms
  • Stir smoothly. Do not shake, as this can introduce air bubbles.
  • apply immediately after slaking  (Refer Further Information TAB).
  • Pour slowly onto your piece
  • use a poker, pick or toothpick to encourage the mixed product to flow into corners and small areas.
  • Leave to set on a level surface, undisturbed until set (approx. 10 minutes).
  • Clean utensils straight away, or dispose of responsibly.

 

Additional information

Weight 1000 g
Colour

Brand

Free Postage (Australia only) on orders above $250 will NOT apply:

  • – If more than one parcel is required.  I will apply Free Shipping to the most expensive (shipping-wise) parcel.  I will bill you for shipping on other parcel(s) in the order.
  • – If a Seniors/Pension Discount code is used.  Please consider carefully which option presents the best value to you.

Some errors may occur in shipping calculations, due to the complexities of combining products in one order.  If you have overpaid shipping I will refund, or issue a credit. If you have underpaid, I will invoice for the difference.

I operate this business without assistance.  Whilst I DO endeavour to ship as soon as I possibly can, I cannot guarantee to ship out the same day as the order is received. I am currently shipping orders on Tuesdays, Wednesday and Fridays.

1-10 Silverback mini glass sheets will fit into a STANDARD SMALL post box.
1-5 Hobby Squares will fit into a SMALL glass box.
Larger orders will require one or more LARGE glass boxes.  Express postage on these parcels is dependant on your postcode. Please email me for a quote if required.

I package carefully. However, damage may occur during transit. Product is shipped entirely at your own risk.

International Shipping:

My website does not allow international customers to check out. Please e-mail me a list of the products you want (you can create a wishlist and email it to me), your shipping address and the preferred method of payment. I will prepare a quote and email it to you.  If acceptable, I will send a payment request/invoice. Items will be shipped once payment has cleared.

Apologies – I do NOT ship glass internationally.  Grouts ship to Australia and New Zealand only.

Your understanding is appreciated.

Preparing your project:

  • Because of the fluid nature of the product, seepage can occur (as shown), so take care to glue well.
    • Clean excess glue away well, as thick deposits may show through the finished layer.
  • Projects should have an edge to stop product flowing off your substrate:
    • You can create a temporary dam with a few layers of painters tape, or some blue-tac;
    • create a tiled edge (grouted);
    • Use a frame; or
    • use one of our Walled Boards, as I did. Available here.
  • Porous substrates should be primed prior to application.
  • Make sure your work is positioned on a LEVEL surface where it can remain undisturbed until set (approx. 10 mins at 23ºC).
  • As a cementitious product, a P95 mask and gloves should be used when handling dry material.
  • Can be coloured:
    • As with most cement products, no more than 10% pigment should be added.
    • Add colour to dry powder, and stir well.
    • Adding pigment will make the product dry out more quickly, so you should mix it a bit wetter (but not too much)
    • NOT suitable for light colours.  

Technical information:

Available in 1 kilo bags.  Note usage ratios above (depending on temp). You need to have a pourable consistency.

  • This is NOT an adhesive!
  • Mixing Ratio: 22.5 – 25 mls water per 100gms powder (will vary depending on temp)
  • Usage temperature: +5 ºC min / 40 ºC max.
  • Slake time – 3 mins,
  • 10 minute working time (pot life) at 23ºC.
  • Proudly Australian Made!
  • 6 months shelf-life (stored in cool, dry, elevated & weatherproof  location).
  • 2 hour Initial set time at 23ºC.
  • 6 hours to Full cure. Product will lighten in colour as it dries.
  • Non-submersible
  • Not recommended for locations subject to vibration.
  • Product is porous.

When in contact with sweat or other body fluids, the product may cause irritant alkaline reactions and allergic reactions to those predisposed. It can cause damage to eyes. It is recommended to use protective gloves and goggles and to take the usual precautions for handling chemicals. If the product comes in contact with the eyes or skin, wash immediately with plenty of water and seek medical attention.

Cleanup:

  • Clean utensils with water straight away, or dispose of responsibly.
  • Clean off hands with water while fresh.

NOTE: Colours may render differently depending on your monitor and settings.