Mosaic Mesh

Included in the No Days range of products is an exciting mosaic mesh. What’s so different between this mesh and others on the market, you may ask?

This alkaline mesh is coated with No Days adhesive, which is a non-toxic, heat set film. To use, simply lay the release paper (supplied with the product) onto an oven-safe tray, and start placing your tesserae down. Once happy with the design, pop them into a 80deg C oven for 20 minutes. Bring them out and let cool. The release liner will peel off, and you can trim the mesh, apply the piece to it’s final location and grout as normal.

If you’ve taken them out of the oven, but decide at any time prior to grouting that you want to change the piece, just pop back onto the release paper and re-heat. Move the tesserae around whilst the product is still hot, then leave to cool.

The product is non-toxic, and stable. It is NOT water soluble, and will not adhere to silicone. It is suitable for exterior use, and has held up under freeze-thaw conditions. I can provide full MSDS sheets on the Adhesive if required.

These products are wonderful for use in a workshop or demonstration setting as they minimise the time needed for your adhesive to cure. Projects are ready to grout as soon as they have cooled.

I also stock:

• non-alkaline mesh – 1.2 m wide, in a continuous 1m length. The difference in my mesh is that I send it out in a roll. No folds to worry about. You can purchase it in 2m, but this will be 2 x 1m lengths, but you save on postage. Price of 1 & 2m includes postage
• sticky mesh – 200mmm wide, in 1 metre lengths. – Super sticky.