Rectangle – Acrylic

Description

These laser-cut shapes are suitable for exterior use, so work wonderfully in your garden.  They make fabulous sun-catchers – string multiples together to make one a bit more fancy! Mix’n’match with our other shapes to make one truly your own. Use with transparent or translucent glass or tiles.

• As these shapes are made to order, please allow a week to fabricate
• Shapes are covered with a protective paper film on both sides. Image shows shape with protective layer. Remove front layer before mosaicing, and leave the rear layer on until finished as protection against scratching.
• Thickness is 3mm or 4.5mm.  4.5mm is thicker (but also more expensive), but I DO recommend it for the larger shapes 300mm or above at least)
• These rectangles are sized according to the “Golden Ratio” (the basis of the Fibonacci sequence).  The width, multiplied by 1.618 will give the height. For example, a 300mm high rectangle will be 185mm wide; a 200mm high will be 123mm wide and so on.
• 200m or less may ship in a small satchel (depending on other items in the order), 250, 300mm or 380mm will ship in a flat box
• Hanging holes can be drilled in the top and/or bottom.
• I recommend using Crystal Fix-All, Prep Multi-Use adhesive or No Days Adhesive
  NOTE: You can use No Days Adhesive film with Acrylic sheets in the oven. This video is from America, so the temps have to be adjusted – 260°F is roughly equivalent to 120°C.